home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ZAM 4
/
ZAM 4.adf
/
Articles
/
48
< prev
next >
Wrap
Text File
|
1994-03-09
|
2KB
|
54 lines
Gears
FREE PORN VIA SATELLITE
---------------------------
If you own a satellite dish... use these simple instructions (which do
NOT involve any large monetary outlay) to receive un-scrambled,
un-censored XXX pornographic programmes :-
Step 1 :-
Find a small mirror and some water-proof sticky tape. Place the
mirror in the centre of the dish and tape it into place.
Step 2 :-
Get a Casio scientific calculator and open the back. Take out the
plug-in chip. Now open your decoder and find the chip called
"ZC404044", this is the main "locker" chip which calculates the
algorithms. Remove this and place the Casio computer chip in. To do
this you have to bend a few "pegs" of the chip out of the way. Bend
peg 6 and 7 and then push the chip in.
Step 3 :-
Replace the decoder and move your dish towards EutelSat 2 F1 which
is just to the right of Astra 1A, 1B and 1C. Just undo the horizontal
locking screws and puch the dish a few millimetres until a picture is
visible on your television.
Step 4 :-
Now go to the near-most City and find an electronics shop. You will
need to purchase an electronic multi-algorithm delayer sender. This
may have to be custom made by the shop - it will send a delaying
signal so that the decoder always receives the correct "answer" to
the number sent by the encoding company via the satellite.
Step 5 :- While you are in the City, go to a nearby adult shop and
purchase a years worth of XXX erotic porn videos.
Step 6 :- As you have now destroyed your decoder, you will be
unable to watch anything. So put a tape of your choice into your
un-damaged VCR and sit back, relax and enjoy.
AND ANOTHER THING....
~~~~~~~~~~~~~~~~~~~~~
I hope nobody tried that ! Whoops! Ermm... Well, I'll tell you a
funny thing. All of the stuff above "And another thing" was written
about 5 months ago. Yep, this text has been sitting on my disk for
that long ! Wow.... So, I've finally come back to finish off the
article and shove it in the all-new ZAM-4!
Hope you enjoy it !